The time information from the operating terminal can be used to synchronize the built-in clocks of devices (wireless modules and gateways) within the mesh network.
Perform time synchronization
1
Tap A.
The time setting screen will open.
2
Tap B. This sends the current time to the mesh network. A history of time synchronization will be recorded.
A gateway is required for scheduled operation.
A gateway is required for scheduled operation because it is used to synchronize the time.
Regarding time errors
The built-in time clocks in the controller and gateway will accumulate errors over time. Since they do not have an automatic time correction function, please periodically synchronize the time on the controller and gateway.