Smart LEDZ Base User ManualVer.1.6

Table of Contents

Names and terminology

This section explains the names and terms used in this system.     
Terms that are also used in general terms are explained in accordance with this system.

system

A mesh network managed by a single gateway and connected to the cloud.

Mesh network

  • A communications network in which wireless signals between wireless modules form a mesh-like network.
  • Even if a wireless module on a mesh network fails, a communication path will be secured via another wireless module, reducing the impact on the communication network.

Wireless Module

A module that transmits and receives wireless signals for control purposes and is built into various devices.

gateway

  • Gateway panel or gateway switch.
  • It controls the entire system and manages the mesh network.

Lighting and peripherals (devices)

  • This refers to the following devices: wireless lighting fixtures, handheld remote controls, smart switches, smart sensor switches, handheld remote controls, phase dimmer units, PWM signal units, wireless pressure a-contact units, and repeaters.
  • The above devices must be registered in the room before use.
  • When we say “device,” we mean all equipment, including gateways.

Smartphone (operating device)

A general term for smartphones on which the Base app has been installed.

Base app

A dedicated app for Smart LEDZ Base.

Room

  • A virtual container for registering lighting and peripheral devices.
  • By creating multiple rooms, you can operate/set lighting and peripheral devices separately for each room.

group

  • A collection of multiple lights.
  • Creating a group allows you to control multiple lights together.

scene

A function that allows you to preset combinations of brightness (dimming rate) and color temperature for each lighting/group in a room and call them up all at once.

schedule

A function that automatically calls up a specified scene at a specified time.

Cloud (dedicated cloud)

  • A dedicated Base server on the Internet.
  • By creating a cloud account, you can back up your settings data to the cloud and connect to a smart speaker.
  • You can use one cloud account per system.